home search contact us site map
home search contact us site map
Current Monitoring Relays
Rhomberg current monitors, are used to monitor AC or DC current, and switch a relay contact at a pre-determined level, primarily used for overcurrent or undercurrent protection. (Available in 11-pin plug-in or DIN rail format)


SP103 Current Monitoring Relay - Single Phase - 1A/5A AC(rms)/DC
Overload or Underload monitoring & protection




Features
  • 11-pin plug-in.
  • Fail-to-safe design.
  • Programmable for overload or underload monitoring.
  • 1A or 5A, AC or DC input range (programmable).
  • Internal shunt for direct in-line current sensing (max 5A AC or DC).
  • Direct interface with conventional current transformers for >5A.
  • Trip point adjustable on percentage scale (10% to 100%).
  • Adjustable hysteresis (5% to 30%).
  • Adjustable response time on trip (0.1 to 10 seconds).
  • Start-up delay 10 sec fixed.
  • Selectable latching (ie manual or auto reset).
  • Relay ON LED.
  • 10A SPDT relay output.
  • Supersedes SP100
  • Requires optional S3-B 11-pin base.
  Data Sheet   More Info   Order Code
Product Comparison | Search | Top 
SP104 Current Monitoring Relay - 200mA, 60mV, 150mV, 5V inputs
Overload or Underload monitoring & protection




Features
  • 11-pin plug-in.
  • Fail-to-safe design.
  • Programmable for overload or underload monitoring.
  • 0-200mA AC (RMS)/DC 60mV/150mV (DC Shunt) 0-5V AC (RMS)/DC
  • Direct interface to DC shunt resistors.
  • Internal shunt for direct in-line sensing current up to 200mA (AC/DC)
  • Trip point adjustable on percentage scale (10% to 100%).
  • Adjustable hysteresis (5% to 30%).
  • Adjustable response time on trip (0.1 to 10 seconds).
  • Start-up delay 10 sec fixed.
  • Selectable latching (ie manual or auto reset).
  • Relay ON LED.
  • 10A SPDT relay output.
  • Supersedes SP101
  • Requires optional S3-B 11-pin base.
  Data Sheet   More Info   Order Code
Product Comparison | Search | Top 
SP510 Single Phase Reverse Power Monitor
Monitoring of AC power flow in one direction only




Features
  • 11-pin plug-in.
  • Fail-to-safe design.
  • Protection against current flowing into generator instead of out of generator
  • Reverse current tripping level adjustable up to 20% of maximum forward current
  • Internal shunt for direct in-line current sensing (max 5A AC).
  • Direct interface with conventional current transformers for >5A.
  • Adjustable response time on trip (1 to 10 seconds).
  • Adjustable start-up delay (0.1 to 10 seconds).
  • Selectable latching (ie manual or auto reset).
  • Relay ON & Reverse Power LEDs.
  • 10A SPDT relay output.
  • Requires optional S3-B 11-pin base.
  Data Sheet   More Info   Order Code
Search | Top